Category: how to

make a paper swan treat box : free tutorial

November 30, 2019

by annwood

For little treats and treasures. This swan favor box is super easy to make. And I’ve made the template in two sizes for you (I demonstrate below using the larger size).

*This tutorial contains affiliate links – meaning I get a small commission if you purchase through the link.

download the template

You will need:

the large or small swan box template
heavy paper – mixed media paper, card stock or watercolor paper all work
exacto knife
masking tape
glue
paint (I used water color)
pencils
scissors
paper clips
clothespins
optional – hanging string or ribbon

Notes before you begin:

The boxes are easy to make but tracing and cutting accuracy are very important. Also, please read through the steps before beginning.

1. Cut out a swan template (I’m using the large) and use the pencil to poke holes through the three dots on the pattern. Use the exacto knife to cut the tab slot lines on the pattern. Place the template on your heavy paper and use a few little pieces of masking tape to keep it in place. Trace around the edge.

* click the images for a larger view

2. Mark the 3 dots with your pencil.

3. Lift up the tab slot and trace that edge.

4. Using the tail dot as a guide draw the straight score lines.

5. To draw the 2 curved score lines cut the line and trace them. You can tape the template back together after.

6. Use the back of the exacto knife to lightly score all the lines you drew.

7. If you would like to add a hanging string use a large embroidery needle to poke holes through the two dots on the tab. Gently erase all the pencil lines.

8. Turn your swan over and paint. I also made the smaller size and painted that one black (for that one I painted both sides.

I like simple, quick gestural painting for the swans. Make a few quick strokes in shades of gray water color and used just a little orange for the beak. I’m using a koi water color box and mudder water brushes. I love both of these items deeply. *FYI – I get a small commission if you purchase through the links. Add some lines on the feathers in pencil or pen. I used pencil and sprayed them with a fixative so they won’t smudge. I made a curvy line for the eye with a black pen.

9. Beginning with the tail gently fold along the score lines.

10. Next fold up the sides.

11. Gently shape the curved score lines too.

12. Apply glue to the front as shown and press the sides together.

13. Use paperclips or a weight to hold the sides together while tit dries.

14. When the front is dry apply glue to the tail and bend one side of the bottom tail feathers over the back.

15. Clamp with a clothespin and gently curl up the end with you finger. Let the tail dry.

16. Repeat for the other tail feather.

17. Curl the ends of the middle feathers over a pen.

18. Add a string or ribbon if you like.

19. Tuck the tab into the slot by pressing down to close the box.

20. Finally curl the feather under the top feather up a little.

I hope you make lots of swan boxes!

make a penny rug for the tiny rag doll with wool scraps

November 6, 2019

by annwood

It’s officially cosy season, I kicked it off by boiling some wool scraps on Sunday. I was trying to felt wool without putting it in the dryer. The boiling on its own did not do much in the way of felting but it did produce an unexpected result that I ended up liking, the dyes ran so all my scraps ended up over-dyed.

I used some of my boiled wool for this little rug for the tiny rag doll. Of course she needs a cosy rug for her little house in the green valley. I ran into wool pennies and penny rugs for the first time a few months ago. I love a scrap project and the idea of using everything and making something out of nothing. And I’ve got plenty of little scraps of wool. The little stitched circles are charming and satisfying to make. It’s meditative work.

And there are endless ways you could embellish and assemble them. I’ve made you templates for the shapes I used in this little rug.

find the template here

You’ll need wool and/ or wool felt scraps (I used a mix of felt and wool)
Embroidery thread and a needle
And (optional) a glue stick for assembling

1. To make the individual pennies place the little circle in the center of the larger. Stitch an X or star in the center with straight stitches. Blanket stitch around the edge, to begin make one straight stitch and come back out out at the edge.

2. Insert the needle a little away from the first stitch and the edge of the circle. Don’t pull the stitch tight.

3. Bring the needle back out just past the edge of the circle, bring your needle through the loop and pull tight.

4. Begin another stitch and repeat all the way around. You will need 20 pennies for this rug.

To assemble blanket stitch 4 pennies onto oval 1. Attach oval 1 to oval 2. I cut oval 1 with pinking shears and stitched little V’s around the edge to attach it.

Place your 16 remaining pennies around the edge and blanket stitch around each penny edge attaching them to oval 2.

I hope you make a penny rug! If you do, I’d love to see, you can use #missthistlesociety and #annwoodpattern on instagram. And find more Miss thistle society patterns here.

make a paper boat : a free tutorial

September 21, 2019

by annwood

*This post contains an affiliate link

Some projects are most satisfying to work on in batches. These paper boats are like that. They are quick and easy and you can make a bunch at once without much extra effort. Plus the finished group is very satisfying. You probably already have most of the materials you need and you could easily be hanging a respectable fleet by the end of the day, who doesn’t want that?

download the boat template

you will also need:

heavy paper (I’m using water color paper) or light cardboard (like poster board)
a bamboo skewer
paper for the sail
elmer’s glue
gluestick
embroidery thread or light string (like baker’s twine)
buttons
paints, brushes and/or collage materials
exacto knife
clothespins or paperclips for clamping

*Please read through all the steps before beginning.

*Also note I included some simple directions on the sail template for your convenience but the directions below include more details and options.

1. Cut out the boat and mast support templates and trace them onto light cardboard or a heavy weight paper. I’m Using water color paper (140 pound hot press is my favorite). Optional – paint both sides. I almost always paint a wash of water color on both sides of the boat and mast support.

2. Place the template back on the boat and poke your pencil through where the score lines intersect. Mark with a dot. Remove the template and draw on the score lines. Draw the score lines on the mast support too and mark an X on the center of the top section.

3. Use the back of an x-acto knife to score the lines on the boat and mast support.

4. Gently fold the boat and mast support at the score lines.

5. Add glue to the last section of the mast support, fold it into a triangle and glue the top section over it.

6. Clamp with paper clip or clothespins while it dries.

7. While your mast support dries paint or collage or draw on your boat. I did all three. I used a wash of watercolor, some pencil lines and a little collage. If you’re doing lots of collage I recommend using nori paste instead of blue stick . It is awesome. You can find it here. * FYI – this is an affiliate link – meaning I get a small commission if you purchase through the link.

8. Apply glue to the bow as indicated on the template.

9. Fold the boat together at the front and clamp with clothespins or paper clips while the glue dries. Alternatively – you can skip the glue, bring the front sides together and stitch on the sewing machine close to the edge.

10. Fold the center back ( A on the template) and apply glue to the top.

11. Bend up tab B – covering the top of tab A and matching the top edges. Apply glue and bend up tab C covering the top of tab B and matching the top edges. Clamp and let dry. Alternatively – skip the glue and attach the three layers with a stitch and a button (step 16 below).

applique bat : a free template and tutorial – how to make really pointy points

August 30, 2019

by annwood

It’s like boiling eggs, there are tons of different methods for getting sharp applique points. I’ve been messing around with a bat shape and working out the point situation. And I made you a template and a little tutorial because I’m nice like that.

Bats sure are pointy, they are like the applique sharp point olympics. Before we dive into that I want to show you a couple other ideas that I think would make cool embroidery or applique projects. I’m especially exited to try that green house. I think it will be my first spoonflower print. I’ve been wanting to try that for ages. The details of the house and little cat etc. could be embroidered. What do you think?

download the bat template

I think it helps to read through all the steps once before beginning. I’ll get you started with the points and curves today and be back on Sunday with more. The points took some practice for me but once I got going it want faster than I expected. Also I mostly laid it flat to take photos but found it easier to do the points especially with it draped over my knee.

1. Trace the stitch line on the template onto freezer paper.

2. Place the pattern on a piece of folded fabric. Use a cotton that’s light weight and not ravely. Tip: Use some spray starch to make the fabric a bit stiff. It helps a lot. You can even make your own spray starch if you like.

3. I cut the template in half before placing it shiny side down on the right side of the cut out fabric. Cutting it made it easier to match up all those points and the center can absorb any margin of error rather than the edges or points. Iron it to the fabric. I pinned it to a piece of vintage linen. It conveniently covers a couple spots and holes. You’ll want to use a ton of pins.

4. I’m beginning on one of the long curves. Make a small knot at the end of the thread and insert your needle from underneath. Come out at the edge of the freezer paper. You will need to make some little clips along the curve. Clip as you go in little sections. Don’t do all the clipping first. Clip to just before the edge of the paper. Don’t clip too close to the points – leave about an inch.

5. Use your needle and finger to fold the edge under and begin stitching with very tiny stitches.

6. Notice I have left about an inch of unclipped fabric before the point. Stop stitching here.

7. Tuck the fabric under the side of the point you are working on and stitch, stop about 1/4 inch before the point.

8. Fold the tip under as shown – with the folded edge flat.

9. Make a couple tiny stitches at the point.

10. For the next step I found it way easier to pick the work up off the table. Take out the pin and use your finger or the needle to fold the other side of the point down and under. Stitch down the side of the point, put the pin back in and then clip in the curve to continue towards the next point.

11. When all your points are stitched clip on each side of the head.

12. Turn the edge of the wing under and stitch. Leave the head unstitched. Clip on each side of the bottom of the bat body too – stitch on each side of the wing and tuck in the edges around the little end of the body and stitch.

13. Cut two little teardrop shapes for ears.

14. Tuck one side of the head under.

15. Fold one of the ear shapes and tuck it in on one side of the head. Stitch it in place. Repeat for the other side. Finally tuck in the edge at the top of the head and stitch.

There will be a part 2 soon for the embroidered and applique details. If you give the bat a try please use tag #annwoodpattern on instagram – I’d love to see!

click here for part 2

easy doll clothes patterns and a free mini straw hat diy

June 1, 2019

by annwood

A tiny summer top! Who would have guessed she’d reveal even a hint of midriff. But there it is. Scandalous. You just never know about someone…

A new sewing pattern! And a free tutorial too!

Use your scraps to make adorable dresses and tops for your tiny ladies. She can wear the dress frontwards or backwards for a variety of looks (it would also make a sweet nightgown made from eyelet or a vintage handkerchief).

The dress, top and hat are quick and easy to make. I spent a ton of time working out a tiny dress pattern that does not require lots of hems and has no fasteners. You could use the simple technique to create all sorts of little garments. They are just the right size for the tiny rag doll and the pattern scales well for other rag dolls.

The tiny rag doll needed a summer wardrobe. She is headed for the French countryside soon so a big sun hat was a must. The hat is included in the pdf and I’ve shared it below too.

make a mini straw hat:

A couple material notes – I used cheese cloth – it’s cheap and easy to find. You can also experiment with any very light weight, gauzy, open weave cotton or linen fabric for different effects.

The nail polish bottle is used for forming the hat crown – any similar glass or plastic container can be used. The bottle I’m using made a hat that’s just the right size for the tiny rag doll – it is 5/8th inches across.

I’m using elmer’s glue

Paint – I used acrylic craft paint – mixing shades of brown, ochre and white for a straw shade.

I finished the hat with a mini silk ribbon. I love these ribbons and you can find them here. They are great for lots of tiny details and embroidery too (fyi – the miss thistle society gets a small commission if you purchase through the link).

1. Cut a piece of cheesecloth about 5 inches by 5 inches. Cheese cloth has 4 layers and we will use them all.

2. Mix a straw shade of paint and add white glue (about 4 parts glue to 1 part paint). Paint the top 1/4 inch of the cap. Optional – I’m mixing glue into the paint but if you prefer you can just use glue and paint later or leave unpainted.

3. Center the cheesecloth over the cap and pull it tightly over it.

4. Hold the cheesecloth tight with an elastic. Paint a thin layer of glue or the glue paint mixture on the cheesecloth. Let this dry completely.

5. Remove the rubber band and remove the cheesecloth from the bottle and spread it flat on wax paper.

6. Paint the cheese cloth with a thin coat glue or the glue mixture a little wider than you would like the brim. Brush firmly out from the center. Let this dry completely.

7. When it’s dry lift it off the wax paper.

8. Trim the brim to whatever size you like.

To finish you can add ribbon or a mini flower or stitch a detail on the brim or crown with embroidery thread. I used 4mm silk ribbon (affiliate link – meaning the miss thistle gets a tiny commission if you purchase through this link).

I hope you make tiny hats! share your photos with the tiny rag doll community by using #annwoodpattern and #missthistlesociety on instagram.

a misbehaving beetle, homemade spray starch and 4 more little joys

May 17, 2019

by annwood

He’s done something. I’m sure of it. It’s all over his face. More about this naughty little beetle in a minute. First I want to tell you about some simple things that are bringing me joy this spring. Since you found your way here they might be up your alley too:

1. sewing in bed

It’s always on the joy list, such a gentle way to wake up. Get something ready to sew the night before and there is nothing at all to think about. Just start sewing. My current bed sewing is sails and needle books (I can’t stop making those little pages). Simple, meditative stitching.

2. the adventures of althea

This is sweet, and beautiful and funny. Dawn Smith has created a magic world for her tiny rag doll and she photographs Althea’s adventures daily.

Follow her while she has tea and visit friends and gardens. It’s awesome.

3. lilacs

It’s such a glorious smell and gone so quickly. When I wake up to the cool spring lilac air I have no choice but to sew in bed. It’s the only responsible thing to do.

4. homemade spray starch

It’s easy to make, cheap, works beautifully and it is non-aerosol and packaging free. Most importantly I did not have to leave my apartment when I ran out of spray starch for my sails.

I love to iron. I’ve been sorting through sail fabric for ships, ironing it and making neat little piles. This is also called procrastination. Productive procrastination but still… Anyway the homemade laundry starch adds even a little more joy to the ironing party.

The starch is just cornstarch and water. Add a couple drops of lavender oil (or whatever you like) for a glorious fresh laundry smell. Laundry is right up there with lilacs for me smell wise. Plus I feel super thrifty and oldschool.

make some laundry starch:

Whisk 1 and 1/2 tablespoons of cornstarch into 2 and ½ cups water. You’re already almost done.
Bring the mixture to a boil, boil for about a minute while stirring.
Remove from the heat and let is cool to room temperature, add a couple drops of scent if you like and pour it through a strainer into a spray bottle.

5 sketchbook

My daily painting and drawings. It’s the best of times, it’s the worst of times, such a huge pain in the a** when I’m super busy. But the joy wins. And it makes me a better thinker.

and a little bonus joy:

I love this tea! I drink buckets of it all day long. You can find it in most grocery stores I think.

what’s on my work table this week

You have met the guilty beetle, the naughty little fellow is regretting his mischief. He is made from gorgeous and very old French scraps. I’m working on lots of misbehaving little french anthropods.

And ships. I love living with them and have been without a personal fleet for too long. This one has a final layer of old paper collage. Come make beetles and paper ships with me this October – I’m teaching several workshops in LA at French General – find info and registration here.

PS – What are you working on? Have you made a doll bed? What smell transports you?

make a quick and easy mini quilt from scraps

May 10, 2019

by annwood

Make a whole stack of them, they’re just the right size for the clothespin doll bed and super quick and fun to make.

These little quilts are the sort I imagine the Sock’s family has mountains of in their big black house in Woebegone Pines. Haphazard, make-do sorts of things, accidentally charming pieced together leftovers, all thread bare from keeping generations of mischievous Socks offspring cozy.

To make your little quilt print the template and gather cotton scraps. Start freestyle piecing them together.

The template makes a doll quilt that is 6 and 1/2 inches X 7 and 1/2 inches. Exactly the right size for the clothespin bed.

You can stitch by hand or machine (I like to use the machine for this). When you’ve got something bigger than the template pin the patchwork to a backing fabric with the right sides together and cut out. Save the patchwork scraps after cutting – you can stitch those together too. You can add a layer of lightweight cotton flannel inside if you like. I prefer the way the quilt drapes without it.

Tip: If you are making a few quilts make one big piece of patchwork and cut them all out. It goes quickly and I think it makes the most interesting compositions.

Stitch the patchwork and backing together. Leave a little opening at one end for turning and clip off the corners.

Turn it right side out and use a chopstick to poke out the corners. Press it and whipstitch the opening. You can quilt through it or not. I mostly went with not but did add some sweet red ties to one quilt.

To make the quilt drape nicely over the bed arrange it and then press it on the bed with a hot iron along the curves and folds.

It’s all ready for mr. socks. I made him pajamas too (using the free little pants pattern) for an even cozier situation but he refused to wear them. You know how mr. socks is…

Do you get my free weekly-ish newsletter? There are tips and tricks, ideas, stuff to try, all the latest news and blogposts and extra stuff, just for subscribers, delivered mostly on Friday. Pretty much.

doll house bed tutorial – part 2 : making the mattress

April 27, 2019

by annwood

This tufted doll mattress and pillow fit the clothespin dollhouse bed perfectly. It’s quick and easy to make and perfect for the tiny rag doll.

how to make a tufted doll mattress

You will need:

the sewing patterns
a basic sewing kit
fabric scraps – I used a sweet print from French General – so perfect for a little mattress.
wool stuffing
embroidery thread and needle

1. Cut out the mattress from cotton fabric, pin with right sides together and stitch as shown.

: 2

: 3

2. Pull the fabric sides apart at the corners

3. Open the seam allowance with your fingers and press the seams together. Stitch across at 1/4 inch. Do this for all 4 corners.

4. With all four corners sewn the mattress should look like this.

how to make a doll house bed from clothespins – part one

April 27, 2019

by annwood

Do you know somebody very little who needs a bed? A tiny rag doll perhaps? I’ve made you a tutorial for a sweet wooden dollhouse size bed made from clothespins and craft sticks. It is perhaps my greatest gift to humanity. Also, I had an unbelievably good time figuring it out and making it. So obsessed…

It is the latest Miss Thistle Society project, the quest to fully outfit the tiny rag doll’s world. Of course she needs a super cozy bed. The epic instructions for the bed are below and find the instructions for an easy tufted doll mattress here.

I hope you make sweet little beds! Tag your posts on instragram with #annwoodpattern and #missthistlesociety.

how to make a doll house bed from clothespins

note : It is very helpful to read through the directions completely before beginning.

*This post contains affiliate links – if you purchase supplies through some of these links The Miss Thistle Society gets a small commission.

Materials:

6 clip clothespins and a few extra for clamping – I’m using these.
11 jumbo craft sticks – The sticks are 6 inches by 3/4 inch – available in most craft stores or you can find them here.
small bamboo skewers – 1 or 2 depending on the length – I’m using these.
paint

Tools

wood glue
wax paper
scissors
wire cutter
ruler
exacto knife
paintbrushes
OPTIONAL – spackle, sandpaper

Cut:

8 – 3 and 3/4 inch craft sticks
2 – 4 and 3/4 inch craft sticks
2 – 4 and 1/2 inch bamboo skewers
6 – split clip clothespins
And 1 whole craft stick

Separate the clothes pins by twisting. I used old but sturdy scissors to cut the craft sticks and wire cutters to snip the skewers.

Accurate measuring is very important to all of this fitting together. And cut your craft sticks as straight as you can.

: 1

: 2

1. Make a mark on one side of 4 clothespin halves 1/8th inch from the notch on the flatside.

2. Apply wood glue to the end of one of the 3 and 3/4 inch craft stick pieces.

3. Working with wax paper underneath press the craft stick against the clothespin -as shown- at the mark. The stick should be at a right angle to the clothespin.

4. Repeat the previous step so you have two glued sets. Let these dry undisturbed on the wax paper until thoroughly set.

5. Make 2 more sets and add a second stick to each. Add the second stick next to the first – closer to the tapered end of the clothespin. Let these dry as well. You should now have 4 glued sets of sticks and clothespin halves.

6. You can use a ruler to check that your sticks are at a right angle to the clothespin.

: 7

: 8

7. When the glue is dry gently peel your pieces from the wax paper. Begin with the single stick pieces. They will be fragile so handle them gently. You will also need 2 more clothespin halves and one of your 4 and 1/2 inch skewers.

8. Flip one clothespin and stick set over so the flat side of the clothespin with the notch is facing you. Apply glue to one end of a the skewer.

easy to make rag doll shoes : a free tutorial

March 15, 2019

by annwood

Easy to make and elegant. I love an expressive foot. Who doesn’t. Most of the dolls I make wear shoes, even when they are otherwise nude, and I usually sew them on like the elegant slippers above.

If you prefer something removable you can make these sweet felt lace up shoes. Both are easy and will work for any doll with a simple, straight rag doll foot. I’ll show you how to make the stitched on shoe first.

Get the complete elegant rag doll sewing pattern here.

stitched on doll shoes

Trace your doll’s feet onto doubled fabric (I’m using light cotton). Trace about 1/8 of an inch from the edge of the foot.

Stitch along the lines. You can stitch by hand or machine but I think machine is better for this. Either way use very small stitches.

Cut out each shoe leaving a small seam allowance.

Clip notches around the toes.

Cut a slit down the middle – a little more than half way – on one side of each shoe. Turn them right side out.

Place the foot in the shoe and tuck each front side in.

Begin to whip stitch the folded edge of the shoe to the foot. At the center make several neat little stitches close together to cover the bit of little raw edge at the center of the V. You could also use a decorative stitch (like blanket stitch) and embroidery thread here to attach the shoe to the foot if you would like an extra fancy slipper.

4 spring ideas to try

March 8, 2019

by annwood

I’ve gathered a few sweet spring projects to share with you:

1. Stitch up some paper treat packages. I may have shared this idea with you before. I love it. Quick and delightful. Find the paper bunnies on the Kreative blog.

2. Nana Company has lots of great tutorials including this basket. I love her fabric choices. The raw linen and eyelet trim are simple and perfect.

3. Or stitch this bunny basket for somebody little. It’s made from an old sweater. Adorable.

4. Make a fabric egg (or a bunch!) – Retro Mama has a pattern and full tutorial.

And if you’ve got the very nice mice pattern you can add some long ears for bunnies. The sweet parade is by Elizabeth.

shop news:

So many paper cuts… But I love making packages. Lot’s of happy snail mail is on the way.

Do you get my free weekly-ish newsletter? There are tips and tricks, ideas, stuff to try, all the latest news and blogposts and extra stuff, just for subscribers, delivered mostly on Friday. Pretty much.

little doll pants : a free sewing pattern

March 2, 2019

by annwood

The little pants are very, very easy and quick and could be resized to fit all sorts of dolls. It’s a fun hand sewing project or if you like you can sew them on the machine. In case you want to make one million pairs of tiny pants.

He looks so happy! Happy to be getting pants. Little pants, just for him. It’s time to make the lambs and get pants on them. I’ve made you a simple pattern for little pants. The lamb is made from the mr. socks sewing pattern with these modifications. Mr. socks could wear pants too if he felt like it (you know how cats are…) but you would need to leave an opening in the back seam to accommodate his tail.

Click here to download the template.

You will also need – cotton, a basic hand sewing kit, embroidery thread and needle and a little button.

Cut 2 pants pieces, cut the top and bottom edges with pinking shears. Mark the seam lines lightly on one piece, pin right sides together and sew just the curved seams.

Open the pants so the curved seams you just sewed are in the center. Pin the legs together and sew the straight leg seams.Trim the leg seam allowance with pinking shears.

Fold the top edge over about 1/4 inch (try the pants on your doll for a perfect fit). Stitch the folded over top with small neat stitches. Fold up the leg bottoms and hem.

Add a draw string of embroidery thread – stitch through the top folded edge – leave the ends hanging. Add a button in the center. Pull the strings to gather and wind around the button clockwise to hold. You’ve got little pants!